Skip to content

Ports

media.play.ports

Transport

MPEG-TS over SRT/UDP; the client connects in caller mode to the stream’s dedicated port.

Supported codecs

Video

  • H.264
  • HEVC
  • AV1
  • JPEG 2000
  • MPEG-2 Video

Audio

  • AAC
  • MP2
  • MP3
  • AC-3
  • E-AC-3
  • SMPTE 302M

Other tracks

  • SCTE-35
  • KLV
  • ID3
  • tx3g
  • Teletext
  • DVB subtitles

This list describes Sapsan output; decoding support depends on the player. Tracks also need valid codec parameters for packaging in the selected container.

AV1 in MPEG-TS uses the stream_type = 0x06 convention with the AV01 registration descriptor; the receiver must understand this form. This does not guarantee compatibility with every AV1-in-TS implementation. Opus is excluded from the list: recognizing or announcing a codec alone does not establish usable output, and the current path does not provide the required Opus TS/PES framing.

Serving from the stream's port

Through central, set srt_play.port and optionally srt_play.passphrase in the streamer config. For a complete example and parameters, see SRT playback. Clients connect to srt://server:4010 in caller mode; replace the port with the configured value.

A port belongs to one stream; duplicate ports across streams are rejected during configuration validation. srt_play.mpegts sets independent output MPEG-TS parameters for this port.